|
 |
 |

NEWS
INDEX
Archives
2005
December
Stretchable silicon could
be next wave in electronics
James E. Kloeppel, Physical Sciences Editor
217-244-1073; kloeppel@uiuc.edu
12/15/05
 |
Click
photo to enlarge |
| University
of Illinois Photo |
| Materials
science and engineering professors John Rogers, above,
and Young Huang led
the team at Illinois that developed a fully stretchable
form of single-crystal silicon with micron-sized,
wave-like geometries that can be used to build high-performance
electronic devices on rubber substrates.
|
|
|
CHAMPAIGN, Ill.
— The next wave in electronics could be wavy electronics.
Researchers at the University of Illinois at Urbana-Champaign have developed
a fully stretchable form of single-crystal silicon with micron-sized,
wave-like geometries that can be used to build high-performance electronic
devices on rubber substrates.
“Stretchable silicon offers different capabilities than can be
achieved with standard silicon chips,” said John Rogers, a professor
of materials science and engineering
and co-author of a paper to appear in the journal Science, as part of
the Science Express Web site, on Dec 15.
Functional, stretchable and bendable electronics could be used in applications
such as sensors and drive electronics for integration into artificial
muscles or biological tissues, structural monitors wrapped around aircraft
wings, and conformable skins for integrated robotic sensors, said Rogers,
who is also a Founder Professor of Engineering, a researcher at the
Beckman Institute for Advanced
Science and Technology and a member of the Frederick
Seitz Materials Research Laboratory.
 |
Click
photo to enlarge |
| Schematic
illustration of the process for building stretchable
single crystal silicon devices on rubber substrates. |
|
|
To create their
stretchable silicon, the researchers begin by fabricating devices in
the geometry of ultrathin ribbons on a silicon wafer using procedures
similar to those used in conventional electronics. Then they use specialized
etching techniques to undercut the devices. The resulting ribbons of
silicon are about 100 nanometers thick – 1,000 times smaller than
the diameter of a human hair.
In the next step,
a flat rubber substrate is stretched and placed on top of the ribbons.
Peeling the rubber away lifts the ribbons off the wafer and leaves them
adhered to the rubber surface. Releasing the stress in the rubber causes
the silicon ribbons and the rubber to buckle into a series of well-defined
waves that resemble an accordion.
“The resulting system of wavy integrated device elements on rubber
represents a new form of stretchable, high-performance electronics,”
said Young Huang, the Shao Lee Soo Professor of Mechanical and Industrial
Engineering. “The amplitude and frequency of the waves
change, in a physical
mechanism similar to an accordion bellows, as the system is stretched
or compressed.”
 |
Click
photo to enlarge |
Scanning electron micrograph of
'wavy' single crystal silicon
ribbons on an elastomeric substrate. This form of
silicon has
the unusual property that it is fully stretchable,
with
mechanics similar to an accordion bellows. |
|
|
As a proof of concept,
the researchers fabricated wavy diodes and transistors and compared
their performance with traditional devices. Not only did the wavy devices
perform as well as the rigid devices, they could be repeatedly stretched
and compressed without damage, and without significantly altering their
electrical properties.
“These stretchable silicon diodes and transistors represent only
two of the many classes of wavy electronic devices that can be formed,”
Rogers said. “In addition to individual devices, complete circuit
sheets can also be structured into wavy geometries to enable stretchability.”
Besides the unique mechanical characteristics of wavy devices, the coupling
of strain to electronic and optical properties might provide opportunities
to design device structures that exploit mechanically tunable, periodic
variations in strain to achieve unusual responses.
In addition to Rogers and Huang, co-authors of the paper were postdoctoral
researcher Dahl-Young Khang and research scientist Hanqing Jiang. The
Defense Advanced Research Projects Agency and the U.S. Department of
Energy funded the work.
Editor’s note: To reach John Rogers, call 217-244-4979; e-mail:
jrogers@uiuc.edu.
To reach Yonggang Huang, call 217-265-5072; e-mail: huang9@uiuc.edu.
|
 |
 |
|